Tools of the Trade

Last updated: 2026-10-01

Angled sash brush

Pro: Cuts clean lines in corners.

DIY: Good for trim and edges.

Flat brush

Pro: Broad coverage on flat surfaces.

DIY: Simple for large flat areas.

Roller frame & nap

Pro: Nap size matches texture: 3/8" smooth, 1/2"–3/4" textured.

DIY: Pick nap by wall texture.

Extension pole

Pro: Reaches ceilings and high walls safely.

DIY: Saves ladder time.

Paint tray & liners

Pro: Liners speed color changes.

DIY: Disposable liners reduce cleanup.

Cut-in tool

Pro: Shields trim while edging.

DIY: Helps straight lines.

Painter's tape

Pro: Remove while paint is still tacky.

DIY: Press firmly to seal.

Drop cloths & plastic

Pro: Canvas absorbs; plastic shields.

DIY: Cover everything.

Putty knife

Pro: Fills nail holes and dents.

DIY: Basic patching.

Taping knife

Pro: Wider blades for seams.

DIY: For drywall joints.

Sanding block & pole sander

Pro: Even pressure on flat areas.

DIY: Pole sander for ceilings.

Orbital sander + HEPA vac

Pro: Dustless sanding for lead-safe.

DIY: Attach HEPA for safety.

Caulk gun

Pro: Seals gaps at trim and corners.

DIY: Smooth with wet finger.

Wire brush

Pro: Removes loose paint and rust.

DIY: For flaky surfaces.

Scraper

Pro: Lifts failing paint.

DIY: Keep blade sharp.

Pressure washer

Pro: Cleans exteriors before paint.

DIY: Use wide fan tip.

Airless sprayer

Pro: Fast coverage on large areas.

DIY: Mask everything; overspray travels.

HVLP sprayer

Pro: Fine finish on cabinets/trim.

DIY: Less overspray than airless.

Spray shields

Pro: Block overspray near edges.

DIY: Cardboard works.

Ladders & stabilizers

Pro: Stabilizers prevent damage to gutters.

DIY: Set on level ground.

Scaffolding & lifts

Pro: Safe access to high exteriors.

DIY: Rent for tall jobs.

Paint mixer

Pro: Blends settled paint evenly.

DIY: Mix before use.

5-gallon bucket & grid

Pro: Rolls large jobs efficiently.

DIY: Grid removes excess.

Masking machine

Pro: Fast paper-and-tape runs.

DIY: For big exterior jobs.

Moisture meter

Pro: Confirms substrate is dry enough.

DIY: Avoid paint failure.

Lead test kit & XRF

Pro: XRF is most accurate for lead.

DIY: Swab kits for quick checks.

Respirator & PPE

Pro: N100/P100 for dust and paint.

DIY: Match filter to hazard.

HEPA vacuum (lead-safe)

Pro: Required for lead-safe cleanup.

DIY: Not a shop vac.

Heat gun & infrared remover

Pro: Softens paint for scraping.

DIY: Keep below 1100°F to avoid lead fumes.

Stain applicator pads

Pro: Even stain on decks/fences.

DIY: Pad on a pole speeds work.

Safety note: use a respirator with the right filter, ventilation, and ladder protection. For lead work, use a HEPA vacuum and RRP practices.

We use cookies to understand site traffic. See our Privacy Policy.